TM 9-2320-269-20-2
FRONT WINCH HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
27.
Support
Two coupling-to-
Place in position.
bracket (1)
front winch motor
hose assemblies
(2) and (3)
28.
Two coupling-to-
Two hose
Put in place.
front winch motor
clamps (4)
hose assemblies
(2) and (3) and
support
bracket (1)
29.
Two hose
Screw (5), new
Screw in, and tighten using 7/16-inch
clamps (4)
lockwasher (6),
socket, handle, and 7/16-inch wrench.
and nut (7)
30.
Frame (8)
Two coupling-to-
Feed through, and put in position.
front winch motor
hose assemblies
(2) and (3) and two
CM11 valve-to-
coupling hose assem-
blies (9) and (10)
31.
Coupling (11)
Coupling-to-front
a. Check tag for proper location, and
winch motor hose
take off.
assembly (2)
b. Screw on, and tighten using 7/8-inch
wrench and pipe wrench.
32.
Coupling (12)
Coupling-to-front
a. Check tag for proper location, and
winch motor hose
take off.
assembly (3)
b. Screw on, and tighten using 7/8-inch
wrench and pipe wrench.
33.
CM11 valve (13)
CM2 valve-to-CM11
a. Check tags for proper locations.
console (14)
valve hose
b. With help from assistant, place in
and frame (8)
assembly (15)
position.
2-1000
Previous Page
