TM 9-2320-269.20-2
DERRICK LEG EXTENSION HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions
(page 2-142).
Replace damaged or defective parts as necessary.
12.
All hose
a.
Clean in clean, soapy water.
assemblies
b.
Rinse in clean water.
c.
Wipe connectors clean with clean
d.
Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-142).
Replace damaged or defective parts as necessary.
13.
All hose
a. Look for cracks, breaks, tears,
assemblies
b. Look for loose connectors.
c. Look for damaged threads.
INSTALLATION
NOTE
Before installing hose assemblies, wrap all external threads with two turns of teflon tape
(page 2-142).
2-989