TM 9-2320-269-20-2
BACK WINDOW
This task covers:
a. Removal (page 2-820)
b. Installation (page 2-822)
INITIAL SETUP
Tools
Materials/Parts - Continued
Knife, pocket
Retainer, rubber, glass-to-cab
Screwdriver, flat-tip,
Sealer, silicone rubber (item 26,
3/16-inch
appendix C)
Tape, measuring
Solvent, drycleaning (item 28,
appendix C)
Materials/Parts
Tape, pressure sensitive (item 31,
appendix C)
Cord, binding (item 10,
appendix C)Personnel Required
Lubricant, silicone spray
(item 20, appendix C)
Three
Rags, wiping (item 24,
appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Eye protection must be worn while replacing back window. If cracked or chipped, tempered glass may
explode and glass particles may get into eyes.
Wear leather gloves while handling broken glass to prevent cuts.
NOTE
Step 1 only applies if glass is broken.
2-820
Previous Page
