TM 9-2320-269-20-2
SEAT - CONTINUED
INITIAL SETUP
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Lubricating stick
Pliers, long round-nose
Socket, 318-inch drive, 9/16-inch
Personnel Required
Wrench, box-end, 112-inch
Two
Materials/Parts
Lockwasher, adjuster to seat riser
(four required)
Lockwasher, bottom cushion
to adjuster (four required)
ACTION
LOCATION
ITEM
REMARKS
1.
Seat back
Four screws (3)
Using 9/16-inch socket and handle,
cushion (1) to
unscrew and take out.
seat bottom
cushion (2)
2.
Seat bottom
Seat back
With assistant, take off and remove
cushion (2)
cushion (1)
from cab.
3.
Seat bottom cushion
Four nuts (6) and
a. Using 1/2-inch wrench, unscrew and
(2) to right seat
lockwashers (7)
take out.
adjuster (4) and
b. Get rid of lockwashers (7).
left seat
adjuster (5)
4.
Right seat adjuster
Seat bottom
With assistant, take off and remove from
(4) and left seat
cushion (2)
cab.
adjuster (5)
5.
Left seat
Wire (8)
a. Squeeze wire end and wire (8)
adjuster(5)
together.
b. Work off retainer spring (9).
c. Bend wire (8), and take off.
6.
Left seat adjuster
Two nuts (11) and
a. Using 1/2-inch wrench, unscrew and
(5) to seat
lockwashers (12)
take off.
riser (10)
b. Get rid of lockwashers (12).
2-824
Previous Page
