TM 9-2320-269-20-2
SEAT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
15.
Right seat
Wire (2)
a. Hook onto adjuster pawl (3),
adjuster (1)
and bend over.
b. Squeeze ends of wire (2) together.
c. Work on retainer spring (4).
d. Pull tight, but do not pull out
pawl (3) on right adjuster (1).
16.
Left seat
Wire (2)
a. Hook through left adjuster pawl (6)
adjuster (5)
making sure wire (2) will remain tight.
If it will not, use long round-nose
pliers to re-bend so it will remain
tight.
b. Bend wires (2) over, and squeeze ends
together.
c. Work on spring (4), locking loop.
d. Pull on adjuster handle (7) making
sure both pawls (3) and (6) are
working.
17.
Right seat
Pawls (3) and (6)
With lubricating stick, lubricate where
adjuster (1) and
and adjusters
pawls (3) and (6) pivot and adjusters
left seat
(1) and (5)
(1) and (5) slide.
adjuster (5)
18.
Seat bottom
With assistant, put in place on
cushion (8)
adjusters (1) and (5).
Move adjusters (1) and (5) as needed
position seat.
19.
Seat bottom
Four new
Screw on, and tighten using 1/2-inch
cushion (8)
wrench.
to adjusters
and nut (10)
(1) and (5)
20.
Seat bottom
Seat back
With assistant, put in place.
cushion (8)
cushion (11)
21.
Seat back
Four screws (12)
With help of assistant, screw in and
cushion (11) to
tighten using 9/16-inch socket and handle.
cushion (8)
seat bottom
cushion (8)
2-826