TM 9-2320-269-20-2
WINDSHIELD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
11. Glass (1)
Rubber
a.
Seat glass firmly in groove.
retainer (2)
b.
Using pocket knife and measuring
tape, cut length of cord at least 15-feet
2-inches (462 centimeters) long.
c.
Put cord into flange groove of rubber
retainer (2) so ends of cord are at top
center glass (1), and do not cross.
d.
Using tape, tape ends of cord to rubber
retainer (2).
12. Cab (3)
Glass (1) and
a.
Spray lips of rubber retainer (2)
rubber retainer (2)with silicone spray.
b.
With help of assistant, put in place.
c.
With assistant pushing on glass (1),
pull out cord from inside cab (3)
snapping rubber retainer (2) over cab
flange (4).
TA229097
2-818