TM 9-2320-269-20-2
RUNNING BOARD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
4.
Running board (1)
Four carriage
Screw in, and tighten using 1/2-inch
to two
bolts (3),
socket, handle, and extension.
brackets (2)
washers (4), new
lockwashers (5),
and nuts
TASK ENDS HERE
WINDSHIELD
This task covers:
a. Removal (page 2-815)
b. Installation (page 2-817)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Knife, pocket
Sealer, silicone rubber (item 26, appendix C)
Screwdriver, cross-tip, number one
Solvent, drycleaning (item 28, appendix C)
Screwdriver, flat-tip, 3116-inch
Tape, pressure sensitive (item 31, appendix C)
Tape, measuring
Personnel Required
Materials/Parts
Two
Cord, binding (item 10, appendix C)
Lubricant, silicone, spray
Equipment Condition
(item 20, appendix C)
Rags, wiping (item 24, appendix C)
Windshield wiper arms removed
Retainer (rubber), glass-to-cab
(page 2-1218).TA229093-
TA229093
2-814
Previous Page
