TM 9-2320-269-20-2
HOOD ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
21.
Hood panel (2)
New hood ledge
Using rubber cement, glue on.
seal (14)
22.
Hood catch (10)
Put in place, and hold.
23.
Hood catch (10)
Eight new blind
Using riveter, put in.
to hood panel (2)
rivets (13)
24.
Hood panel (2)
Handle (9)
Put in place.
25.
Handle (9) to
Nut (11) and new
Screw on, and tighten using 9/16-inch
hood catch (10)
lockwasher (12)
socket and handle.
26.
Hood panel (2)
Two hood braces (7)
Put in place.
27.
Two hood
Four screws (8)
Screw in, and tighten using 3/8-inch
braces (7) to
socket and handle.
hood panel (2)
28.
Hood panel (2)
Hood prop (1)
Put in place, and hold.
29.
Hood prop (1)
Screw (3), two
Screw in, and tighten using 7/16-inch
to hood panel (2)
washers (5), new
wrench, 7/16-inch socket, and handle.
lockwasher (6),
and nut (4)
TA229069
2-779
Previous Page
