TM 9-2320-269-20-2
HOOD ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
NOTE
Steps 13 thru 29 are the same for both right and left hood panels. The left hood panel is used as the
example.
13.
Hood prop (1)
Screw (3), nut (4),
a. Using 7/16-inch wrench, 7/16-inch
to hood panel (2)
two washers (5),
socket, and handle, unscrew and take
lockwasher (6),
out.
and prop (1)
b. Get rid of lockwasher (6).
14.
Two hood
Four screws (8)
Using 3/8-inch socket and handle,
braces (7) to
and two hood
unscrew and take out.
hood panel (2)
braces (7)
15.
Handle (9)
Nut (11) and
a. Using 9/16-inch socket and handle,
to hood
lockwasher (12)
unscrew and take out.
catch (10)
b. Get rid of lockwasher (12).
16.
Hood panel (2)
Handle (9)
Take off.
17.
Hood catch (10)
Eight blind
a. Using drill and bit, drill out.
to hood panel (2)
rivets (13)
b. Get rid of.
18.
Hood panel (2)
Hood catch (10)
Take off.
19.
Hood ledge seal (14)
a. Peel off.
b. Get rid of.
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flames nearby when using
solvent. Failure to observe these precautions could cause serious injury or death.
20.
Hood panel (2)
Using drycleaning solvent and rags, wipe
clean.
2-778
Previous Page
