TM 9-2320-269-20-2
HOOD LATCH ROD AND HOOD LATCH ROD BRACKET - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL- CONTINUED
1.
Hood latch
Two screws (3)
Using 3/8-inch socket and handle,
rod (1) to
and hood latch
unscrew and take out.
splash panel (2)
rod (1)
2.
Hood latch rod
Two screws (6)
Using 1/2-inch socket, extension, and
bracket (4) to
and hood latch
handle, unscrew and take off.
cowl (5)
red bracket (4)
INSTALLATION
3.
Cowl (5)
Hood latch rod
Put in place, and hold.
bracket (4)
4.
Hood latch rod
Two screws (6)
Screw in, and tighten using 1/2-inch
bracket (4)
socket, extension, and handle.
to cowl (5)
5.
Splash panel (2)
Hood latch rod (1)
Put in place, and hold.
6.
Hood latch
Two screws (3)
Screw in, but do not tighten.
rod (1) to
splash panel (2)
ADJUSTMENT
NOTE
For adjustment of hood latch rod after installation, go to step 8.
7.
Hood latch
Two screws (3)
Using 3/8-inch socket, extension,
rod (1) to
and handle, loosen.
splash panel (2)
8.
Hood latch
Push down all the way.
rod (1)
9.
Hood latch
Two screws (3)
Tighten using 3/8-inch socket, extension,
rod (1) to
and handle.
splash panel (2)
2-784