TM 9-2320-269-20-2
RADIATOR SHELL TOP PANEL - CONTINUED
INITIAL SETUP - CONTINUED
Materials/Parts
Personnel Required
Lockwasher, radiator shell
One
top panel to radiator support
(four required)
Equipment Condition
Hood open (page 2-7).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Hood center panel
Two screws (3)
Using 7/16-inch socket and handle,
(1) to bracket (2)
unscrew but do not take out.
2.
Hood center panel
Two screws (6), four
a. Using 7/16-inch wrench, 7/16-inch
(1) to radiator
washers (7), two
socket, and handle, unscrew and
shell top panel
lockwashers (8), and
take out.
(4) and radiator
nuts (9)
b. Get rid of lockwashers (8).
tie bar (5)
3.
Hood center
Raise about one inch (2.54 mm), and
panel (1)
support.
4.
Radiator shell top
Two screws (10),
a. Using 7/16-inch wrench, 7/16-inch
panel (4) to
four washers (11),
socket, and handle, unscrew and
TA229075
2-787
Previous Page
