TM 9-2320-269-20-2
RADIATOR SHELL SIDE PANELS
This task covers:
a. Removal (page 2-790)
b. Installation (page 2-794)
INITIAL SETUP
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Sealer, silicone rubber (item 26,
Knife, putty
appendix C)
Screwdriver, cross-tip, number two Solvent, drycleaning (item 28, appendix C)
Socket, 3/8-inch drive,
1/2-inch
Personnel Required
Materials/Parts
One
Brush, paint, 1/2-inch (item 5,
Equipment Condition
appendix C)
Lockwasher, radiator shell side panel
Hood open (page 2-7).
to radiator support (two required)
Grille removed (page 2-785).
Rag, wiping (item 24, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Except as noted, the steps in this task are the same for both right and left radiator shell side panels. The
left side panel is used as the example.
To remove left radiator shell side panel, remove cable winder (TM 9-2320-269-10).
1.
Access cover (1)
Two screws (3)
Using cross-tip screwdriver, unscrew
to cab (2)
and access cover (1)
and take out.
2.
Fender (4)
Eleven screws (6)
Using 1/2-inch socket and handle,
to cab (2)
unscrew but do not take out.
and splash
panel (5)
2-790
Previous Page
