TM 9-2320-269-20-2
FENDERS, RADIATOR, AND GRILLE ASSEMBLY
This task covers:
a. Removal (page 2-764)
b. Installation (page 2-768)
INITIAL SETUP
Tools
Materials/Parts
Extension, 3/8-inch drive, 6-inch
Lockwasher, splash panel to bracket
Handle, ratchet, 3/8-inch drive
(three required)
Hoist, 2-ton lifting capacity
Nut, self-locking, radiator support
Pan, drain, 3-qt
to front frame crossmember
Screwdriver, cross-tip, number two
Nut, self-locking, relay box bracket
Screwdriver, flat-tip, 3/16-inch,
to firewall
three-inch
Oil, lubricating (item 22, appendix C)
Socket, 3/8-inch drive, 7/16-inch
Rags, wiping (item 24, appendix C)
Socket, 3/8-inch drive, 112-inch
Socket, 3/8-inch drive, 3/4-inch
Personnel Required
Wrench, box-end, 112-inch
Wrench, box-end, 3/4-inch
Three
Wrench, open-end, 11/16-inch
Wrench, open-end, 1 1/4-inch
Equipment Condition
Rope winder removed (TM 9-2320-269-10).
Battery cables disconnected (page 2-414).
Cooling system drained (page 2-265).
Hood assembly removed (page 2-774).
Windshield washer reservoir and pump
removed (page 2-1220).
Surge tank and bracket removed
(page 2-223).
Winch, winch support, and rear bumper
assembly removed (page 2-680).
2-763
Previous Page
