TM 9-2320-269-20-2
CAB DOOR GLASS AND CHANNEL
This task covers:
a. Removal (page 2-706)
c.
Installation (page 2-712)
b. Replacement (page 2-724)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Brush, wire, rotary wheel
Rags, wiping (item 24, appendix C)
Grinder, bench
Lubricant, silicone grease
Gun, oil
(item 19, appendix C)
Handle, ratchet, 1/4-inch drive
Knife, craftsman's
Personnel Required
Knife, putty
Pliers, long round-nose
One
Pliers, slip-joint, straight-nose
Screwdriver, cross-tip, number three
Equipment Condition
Screwdriver, flat-tip, 3/16-inch
Socket, 1/4-inch drive, 11/32-inch
Cab door inner panel removed (page 2-730).
Wrench, box-end, 3/8-inch
Materials/Parts
Brush, paint (item 5, appendix C)
Glass-setting tape, cork
Oil, lubricating (item 22,
appendix C)
Lockwasher, channel retainer
Lockwasher, screw assemblies
(five required)
Primer, rust-proofing, red oxide
2-719
Previous Page
