TM 9-2320-269-20-2
CAB DOOR GLASS AND CHANNEL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REPLACEMENT
NOTE
Replacement steps are for broken window.
19.
Retainer
Broken glass (2)
Scrape out using flat-tip screwdriver and
channel (1)
and old glass-
putty knife.
setting tape (3)
WARNING
Eye and head protection must be worn when using rotary wire brush on bench grinder to prevent wires from being
imbedded in eyes or hands, hands severely scraped, or other injuries.
20.
Retainer
a. Using rotary wire brush, clean all
channel (1)
remaining dirt and rust from inside
channel (1).
b. Inspect for severe rust damage on
channel (1) or badly bent slide (4).
Replace damaged channel.
c. Using brush, paint inside of channel
(1) with rust-proofing primer, and let
dry according to instructions on primer.
21
Replacement
New glass-setting
Wrap around bottom of glass (2).
glass (2)
tape (3)
22.
Replacement glass
Retainer channel (1)
With glass setting on soft wood or rags,
(2) and new glass-
push channel (1) onto glass (2) until
setting tape (3)
glass is firmly seated in channel.
2-724
Previous Page
