TM 9-2320-269-20-1
SAFETY VALVE
This task covers:
a. Removal (page 2-584)
b. Installation (page 2-584)
INITIAL SETUP:
Tools
Personnel Required
Wrench, open-end, 518-inch
One
Materials/Parts
Equipment Condition
Tape, teflon (item 32, appendix C)
Air reservoirs drained (page 2-106).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Drain air from system before removing lines or fittings to avoid personnel injury from compressed air.
1.
Reservoir (1)
Valve (2)
Using 5/8-inch wrench, unscrew and take off.
INSTALLATION
2.
Reservoir (1)
Valve (2)
a. Wipe threads clean, and wrap with
teflon tape (page 2-142).
b. Screw in, and tighten using 5/8 -inch wrench.
2-584
Previous Page
