TM 9-2320-269-20-1
TRANSMISSION CONTROL CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
NOTE
If only pivot is being installed, go to ADJUSTMENT.
19.
Bracket (11)
Clamp (12), cable
Put in position.
(1), and spacer (13)
20.
Clamp (12)
Two screws (14),
Screw in, and tighten using screwdriver
new lockwashers
and 3/8-inch wrench.
(15), and nuts (16)
21.
Transmission (17)
Clamp (18) with
Put in position.
cable (1)
22.
Clamp (18)
Screw (19)
Screw in, and tighten using 1/2-inch
socket and handle.
23.
Cable (20)
Cable (1) and new
Hold cables (1) and (20) together, and
cable tie (21)
wrap with cable tie (21).
TA228856
2-449
Previous Page
