TM 9-2320-269-20-1
TRANSMISSION CONTROL CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
14.
Cable (1)
Nut (2) and
a. Screw nut (2) away from end of
pivot (3)
cable (1).
b. Screw pivot (3) onto cable (1).
c. Screw nut (2) against pivot (3), and
tighten using pliers wrench and 1/2-inch
wrench.
15.
Handle (4)
Pivot (3)
a. Move handle (4) to number 1 position.
b. Spread handle (4) apart, and put
pivot (3) through.
16.
Pivot (3)
New locknut (5)
Screw on, and tighten using 1/2-inch
wrench.
17.
Spacer (6)
Cable (1)
a. Put in position.
b. Put bolt (7) through.
18.
U-bolt (7), two
Screw in, and tighten using 3/8-
flat washers (8),
inch wrench.
new lockwashers (9),
and nuts (10)
TA228855
2-448
Previous Page
