TM 9-2320-269-20-1
TRAILER RECEPTACLE, 24-VOLT
This task covers:
a. Removal (page 2-430)
b. Installation (page 2-431)
INITIAL SETUP:
Tools
Materials/Parts
Pliers, diagonal cutting
Connector, solderless (as required)
Screwdriver, flat-tip, 1/4-inch
Lockwashers, 24-volt receptacle
Stripper, wire
Tape, electrical (item 30, appendix C)
Tool, crimping
Tags, marking (item 29, appendix C)
Wrench, open-end, 7/16-inch
Personnel Required
Two
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Tag receptacle lead wires before removal to aid in installation.
1. 24-volt
Receptacle
Take off tape (3) from harness
receptacle (1)
harness (2)
connection.
2. Receptacle
Wires (4)
Using diagonal cutting pliers, cut
harness (2)
wires (4) above and below existing
connectors (5), and let hang.
3. Receptacle lower
Nut (7), lockwasher
a. Using 7/16-inch wrench and flat-tip
left mounting
(8), and ground
screwdriver, unscrew and take off.
screw (6)
wire (9)
b. Get rid of lockwasher (8).
c. Take off ground wire (9).
4. 24-volt
Receptacle lower
Take out.
receptacle (1)
left mounting
screw (6)
2-430
Previous Page
