TM 9-2320-269-20-1
TRAILER RECEPTACLE, 12-VOLT
This task covers:
a. Removal (page 2-428)
b. Installation (page 2-429)
INITIAL SETUP:
Tools
Materials/Parts
Screwdriver, flat-tip, 3/16-inch
Lockwashers, body (two required)
Screwdriver, flat-tip, 5/16-inch
Tags, marking (item 29, appendix C)
Wrench, open-end, 7/16-inch
Personnel Required
Two
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Tag receptacle lead wires before removal to aid in installation.
1. 12-volt
Dust boot (2)
Slide back.
receptacle (1)
2. Seven wire
Seven lead wires (4)
Using 3/16-inch flat-tip screwdriver,
sockets (3)
and mounting
unscrew and take out.
screws (5)
3. 12-volt
Two nuts (6),
a. Using 51/16-inch flat-tip screwdriver,
receptacle (1)
lockwashers (7),
and 7116-inch wrench, unscrew and
screws (8), and
take out.
ground wire (9)
b. Get rid of lockwashers (7).
4. Body (10)
Receptacle (1)
Take out.
2-428
Previous Page
