TM 9-2320-269-20-1
24-VOLT CONVERTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Tag wires on removal to aid in installation.
1. Four driver's seat
Four screws (2)
Take out using 9/16-inch socket and
back supports (1)
handle.
2. Driver's seat (3)
Seat back (4)
Lay forward onto seat (3).
3. Converter box
Eight screws (6)
Loosen using flat-tip screwdriver.
terminal block (5)
4.
Eight lead wires (7)
Take off.
5. Converter (8)
Four nuts (10),
a. Using 7/16-inch wrench, 7116-inch
and cab (9)
eight flat washers
socket, and handle, unscrew and
(11), four lock-
take out.
washers (12), screws
b. Get rid of lockwashers (12).
(13), and ground
wire (14)
6. Cab (9)
Converter (8) and
Take out.
four spacers (15)
INSTALLATION
7. Cab (9)
Four screws (13)
Put in place.
and flat washers (11)
8. Four screws (13)
Four spacers (15)
Slide on.
9.
Converter (8)
Put in position.
10.
Ground wire (14)
Slide on upper right hand screw (13).
11.
Four lockwashers
Screw on, and tighten using 7/16-
(12), flat washers
inch socket, handle, and 7/16-inch
(11), and nuts (10)
wrench.
NOTE
Use tags to insure proper hookup.
2-426
Previous Page
