TM 9-2320-269-20-1
HORN BUTTON
This task covers:
a. Removal (page 2-411)
b. Disassembly (page 2-412)
INITIAL SETUP:
Tools
Materials/Parts
Extension, 112-inch drive, 5-inch
Tape, pressure sensitive (item 31,
Handle, ratchet, 1/2-inch drive
appendix C) (if required)
Puller, wheel, mechanical
Screwdriver, cross-tip, number two
Personnel Required
Screwdriver, flat-tip, 1/4-inch
Socket, 1/2-inch drive, 1 1/4-inch
One
Equipment Condition
Battery ground cable disconnected
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Steering wheel (1)
Horn button (2)
a. Push in, and turn counterclockwise
one-quarter turn.
b. Take out slowly so spring (3) does
2.
Spring cup (4)
Take out.
and spring (3)
3.Horn button base (5)
Three screws (6)
Using cross-tip screwdriver, unscrew and take out.
2-411
Previous Page
