TM 9-2320-269-20-1
HORN BUTTON - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED '
4. Horn button base (1)
Contact ring
Using flat-tip screwdriver, unscrew and
screw (2)
take out.
5. Steering wheel (3)
Horn button base (1)
Take out.
NOTE
Before removal, mark steering wheel and column alinement to aid in installation.
6. Steering column (4)
Nut (5)
Using 1 114-inch socket, extension,
and handle, unscrew and take off.
7.
Steering wheel (3)
Using mechanical puller, take off.
8. Steering wheel (3)
Two screws (6) and
a. Using cross-tip screwdriver, unscrew
contact ring (7) and take out screws (6).
b. Take out ring (7).
9. Relay (8)
Wire (9)
Unplug.
10. Wire (9)
Connector (10)
Take off (page 2-433).
11. Steering column (4)
Wire (9), spring
Pull out.
(11), and washer (12)
INSTALLATION
12. Steering column (4)
Washer (12), spring
Put through.
(11), and wire (9)
13. Wire (9)
Connector (10)
Put on (page 2-433).
14.
Relay (8)
Wire (9)
Plug on.
15.
Steering wheel (3)
Contact ring (7)
a. Put in ring (7).
and two screws (6)
b. Screw in screws (6), and tighten
using cross-tip screwdriver.
2-412
Previous Page
