TM 9-2320-269-20-1
ACCELERATOR CONTROL CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
19.
Accelerator
Accelerator cable
Screw in, and tighten using 3/8-inch
cable (2)
ball joint (14)
wrench.
20.
Accelerator
Accelerator cable
a. Push pedal down all the way.
pedal rod (15)
ball joint (14)
b. Put ball joint (14) through rod,
turning ball joint in or out as needed.
21.
Accelerator cable
Washer (16) and
Screw in, and tighten using 3/8-inch and
ball joint (14)
nut (17)
7/16-inch wrenches.
NOTE
FOLLOW-ON MAINTENANCE:
1. Install air cleaner (page 2-152).
2. Close left side hood (page 2-7).
3. Install engine cover (page 2-840).
TASK ENDS HERE
TA228683
2-189
Previous Page
