TM 9-2320-269-20-1
ACCELERATOR PEDAL ROD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
8.
Accelerator rod
Accelerator rod (2)
Put in bracket (1) to properly
bracket (1)
support accelerator pedal (3).
9.
Accelerator rod
Accelerator rod
Push through.
(2) to bracket (1)
pivot pin (4)
10.
Accelerator rod
Clip (5)
Press on, using flat-tip screwdriver.
pivot pin (4)
11.
Accelerator
Accelerator cable
Position on.
rod (2)
ball joint (6)
12.
Accelerator cable
Washer (7) and
Screw in, and tighten using 7/16-inch
ball joint (6) to
nut (8)
and 3/8-inch wrenches.
accelerator rod (2)
13.
Accelerator
Throttle cable
Slide through.
rod (2)
end (9)
14.
Throttle
Throttle cable
a. Put on cable (9) against accelerator
cable end (2)
stop (10) and
rod (2) pushed all the way in.
socket-head
b. Screw in, and tighten using 3/32-inch
screw (11)
key.
TASK ENDS HERE
TA228678
2-184
Previous Page
