TM 9-2320-269-20-1
THROTTLE CABLE
This task covers:
a. Removal (pages 2-170)
b. Installation (pages 2-171)
INITIAL SETUP:
Tools
Key, socket-head screw, 5/64-inch
Personnel Required
Key, socket-head screw, 3/32-inch
Pliers, slip-joint, straight-nose
One
Wrench, open-end, 1/2-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Throttle cable
Screw (2)
Using 3/32-inch key, unscrew part way.
stop (1)
2.
Throttle cable (3)
Throttle cable
Take off.
stop (1)
3.
Throttle cable
Clip (5)
Using slip-joint pliers, take off.
(3) to support
bracket (4)
4.
Accelerator pedal
Throttle cable (3)
Take out.
rod (6)
5.
Control knob (7) to
Screw (8)
Using 5/64-inch key, unscrew and
throttle cable (3)
take off.
6.
Throttle cable (3)
Control knob (7)
Take off.
7.
Throttle cable (3)
Retaining ring (10)
Using pliers and 1/2-inch wrench,
to dash panel (9)
unscrew and take off.
8.
Dash panel (9)
Throttle cable (3)
Take out from inside panel (9).
2-190
Previous Page
