TM 9-2320-269-20-1
FUEL SUPPLY LINES
This task covers:
INITIAL SETUP:
Tools
Personnel Required
One
Socket, 3/8-inch drive, 3/4-inch
Wrench, open-end, 5/8-inch
Equipment Condition
Wrench, open-end, 3/4-inch
Battery ground cable disconnected
Materials/Parts
Transmission cover removed (page 2-842).
Lockwasher, clamp to frame
Tape, pressure sensitive (item 31,
appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
To prevent dirt from entering system, cover open lines and fittings with tape.
1.
Tube coupling (1)
Fuel tank supply
Using 3/4-inch and 5/8-inch wrenches,
line (2)
take off.
Reach underneath cab for access.
2.
Elbow (3)
Fuel tank supply
Using 3/4-inch wrench, unscrew and
line (2)
take off.
2-170