TM 9-2320-269-20-1
AIR CLEANER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Fuel pump
Nine screws (2)
Using screwdriver, unscrew and
assembly (1)
take out.
2. Fuel tank (3)
Fuel pump assembly
a. Takeout.
(1) and gasket (4)
b. Using gasket scraper, take off
gasket (4).
c. Get rid of gasket (4).
Place a clean rag over tank opening
to keep dirt out.
3. Discharge hose (5)
Two hose clamps (6)
Using pliers, open and slide down.
4. Fuel pump (7)
Discharge hose (5)
Take off.
5.
Lead wire (8)
Using pliers, push in and turn one-
quarter turn counterclockwise to unplug.
6. Support bracket (9)
Retaining arm (10)
a. Using scribe, matchmark bracket
and fuel pump (7)
and pump.
b. Release, and take off pump (7).
7. Fuel pump (7)
Collar (11) and
Take off.
ring (12)
INSTALLATION
8.
Collar (11) and
Put on.
ring (12)
9. Support bracket (9)
Retaining arm (10)
a. Transfer matchmark, step 6, if
and fuel pump (7)
installing new pump.
b. Line up pump (7) to bracket (9),
and close arm.
10. Discharge hose (5)
Two hose
Slide on (if new hose or clamps
clamps (6)
are being installed).
11. Fuel pump (7)
Discharge hose (5)
Put in.
12. Discharge hose (5)
Two hose clamps (6)
Using pliers, pinch close.
a-
13. Fuel pump (7)
Lead wire (8)
Using pliers, press in place and
turn clockwise one-quarter turn.
2-168
Previous Page
