TM 9-2320-269-20-1
FUEL RETURN LINES
This task covers:
a. Removal (pages 2-170)
b. Installation (pages 2-171)
INITIAL SETUP:
Tools
Materials/Parts
Handle, ratchet, 3/8-inch drive
Tape, pressure sensitive
Socket, 3/8-inch drive, 9/16-inch
(item 31, appendix C)
Wrench, open-end, 9/16-inch
Wrench, open-end, 5/8-inch
Personnel Required
(two required)
Wrench, open-end, 11/16-inch
One
Wrench, open-end, 3/4-inch
Equipment Condition
Battery ground cable disconnected
Remove transmission cover (page 2-842).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
To prevent dirt from entering system, cover open lines and fittings with tape.
1.
Elbow (1)
Fuel tank return
Using 5/8-inch wrench, unscrew and
line (2)
take off.
2.
Clamp (3) and
Nut (5), lockwasher
Using 9/16-inch wrench and 9/16-inch
(6), spacer (7),
socket and handle, unscrew and take off.
and screw (8)
2-173
Previous Page
