TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
RUNS UNEVENLY - SURGES, STALLS, OR NO POWER - CONTINUED
Step 7. Test fuel supply lines (3), (4), and (5) for blockage - Continued
c. If gage reads less than 3 to 5 psi (21 to 35 kPa) at any fitting (8 thru 12), remove the previous line
(3), (4), and (5), and fitting (8 thru 12). Clean or replace as needed using 3/4-inch and 5/8-inch
wrenches, or replace filters (6) and (7) as needed (page 2-178).
TA228595
2-69
Previous Page
