TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
DOES NOT CRANK - CONTINUED
Step 6.
Inspect magnetic switch (6) and wires (7) for corrosion, loose parts, and damage.
a. Open right side hood panel (8) (page 2-7).
b. If switch terminals (9) or wire terminals (10) are corroded or damaged, tag and remove wires
(7) using 318-inch and 1/2-inch wrenches.
c.
Clean or repair wires (7) (page 2-146), or replace switch (6) as needed using 1/2-inch wrench.
d. Install wires (7) using 318-inch and 1/2-inch wrenches.
e. If switch (6) is damaged, replace (page 2-400).
TA228586
2-59
Previous Page
