ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
TEST OR INSPECTION
TRANSMISSION - CONTINUED
Check for engine overheating (TM 9-2320-269-10).
If transmission still overheats, notify Direct Support Maintenance.
If you have any of the following transmission malfunctions, notify Direct Support Maintenance:
a. Creeps in first or reverse gear.
b. Shifts roughly.
c. Shifts at improper speeds.
d. Does not shift.
DRIVE LINE (POWER DIVIDER) LOCKOUT SYSTEM
DOES NOT ENGAGE OR STAY ENGAGED
Drain air from system before removing lines or fittings to avoid personnel injury from compressed air.
Open draincocks by hand. To avoid equipment damage, never hit with a tool.
Step 1. Check power divider lines (1) for loose parts and damage.
b. If lines (1) are damaged, replace using 9/16-inch wrench.
c. If lines (1) are loose, tighten using 9/16-inch wrench.