ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
TEST OR INSPECTION
TRANSMISSION - CONTINUED
OIL LEAKING - CONTINUED
Step 3. Inspect oil cooler (5) for damage and loose parts.
a. If cooler elbows (6) are loose, remove hoses (4), and tighten or replace as needed. Install hoses (4) using 1
118-inch and 1 114-inch wrenches.
b. If oil cooler (5) is cracked, broken, or dented, replace radiator (7) (page 2-211).
Step 4. Inspect coolant for transmission oil.
a. Open right side hood panel (8) (page 2-7), and unscrew surge tank cap (9).
b. If coolant shows signs of transmission oil, replace radiator (7) (page 2-211).
c. Screw on surge tank cap (9), and close hood (8) (page 2-7).