ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
TEST OR INSPECTION
WILL NOT RESPOND TO SELECTOR HANDLE MOVEMENT
Check oil level, and fill as needed (LO 9-2320-269-12).
Inspect cable (1) for damage and loose parts.
a. If cable (1), swivel (2), or pivot (3) are broken or loose, replace or tighten as needed (page 2-443).
b. With selector (4) in neutral, disconnect swivel (2) using pliers, and have assistant move selector (4).
d. Put selector (4) in neutral, and connect swivel (2) using pliers and new cotter pin (5).
e. If transmission still will not respond to selector movement, notify Direct Support Maintenance.