ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
TEST OR INSPECTION
TRANSMISSION - CONTINUED
OIL LEAKING - CONTINUED
Step 5. Inspect oil pan (1) for damage and loose parts.
a. If oil pan (1) is cracked, broken, or dented, replace (page 2-439).
b. If oil pan (1) or drain plug (2) are loose, remove, replace gasket (3), and install (page 2-439).
c. If oil level gage and tube (4) are broken or loose, tighten or replace as needed (page 2-436).
Step 6. Inspect transmission (5) for damage and loose parts.
If transmission (5) is cracked, broken, or pa rts are loose, notify Direct Support Maintenance.
Step 7. Test transmission (5), lines (6), hoses (7), and cooler (8) for leaks.
Do not put hands in or around drive train, engine, and wheels. Vehicle may move causing personnel injury.
a. Have assistant position vehicle over pit, apply brakes, start engine, and put transmission into gear (TM 9-
b. Check for leaks, and have assistant shut off engine, and put transmission in neutral.
c. If transmission (5) leaks, notify Direct Support Maintenance.
d. If lines (6) or hoses (7) leak, replace using applicable maintenance procedure.