TM 9-2320-259-20-2
WINDSHIELD WIPER LINKAGE - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON M AINTENANCE:A
1. Install defroster hoses (page 2-1257) and defroster duct (page 2-1247).
2. Install windshield wiper arms and blades (page 2-1218).
3. Connect battery ground cable (page 2-414).
TASK ENDS HERE
WINDSHIELD WIPER SWITCH
This task covers:
a. Removal (page 2-1242)
b. Installation (page 2-1244)
INITIAL SETUP
Tools
Materials/Parts
Chisel, cold, hand, 3/8-inch
Lockwasher, wire-to-switch
Hammer, ball-peen, machinist's, 2-oz
Lockwasher, circuit breaker-to switch
Handle, ratchet, 1/4-inch drive
Key, socket-head screw, 5/64-inch
Personnel Required
Socket, 1/4-inch drive, 3/8-inch
One
Equipment Condition
Battery ground cable disconnected
(page 2-414).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Knob (1) to Set screw (3)Using key, unscrew and take out.
switch (2)
2.
Switch (2)
Knob (1)
Take off.
3.
Switch (2) to
Nut (5)
a. Loosen using chisel and hammer on
dashboard (4)slot to drive counterclockwise.
b. Unscrew, and take off.
2-1242
Previous Page
