TM 9-2320-269-20-2
AUXILIARY TOOLS HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
WARNING
Hose assemblies are under spring tension. Do not allow hoses to spring back on reel.
Free ends of hoses can snap back violently causing serious injury to personnel.
CAUTION
Hold on to hoses while screwing them on to adapter. Adapter threads can be ruined if
spring tension on hose is not relieved while screwing on hose.
48. Hose
Two quick dis-
Feed through.
brackets (1)
connect-to-hose
reel hose assembly
(2) and (3)
49. Quick disconnect-
Washer (4) and
a.
Pull and hold about 12-inches
to-hose reel hose
adapter (5)
(30.5 mm) of hose (2).
assembly (2)
b.
Screw on, and tighten using
3/4-inch and 13/16-inch wrenches.
c.
Slowly release hose (2).
50. Quick disconnect-
Washer (6) and
a.
Pull and hold about 12-inches
to-hose reel hose
adapter (7)
(30.5 mm) of hose (3).
assembly (3)
b.
Screw on, and tighten using 3/4-inch
and 11116-inch wrenches.
c.
Slowly release hose(3)
TA229202
2-962
Previous Page
