TM 9-2320-269-20-2
AUXILIARY TOOLS HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
38. Reel assembly (1)
Two needle valve-
a.
Check tags for correct location.
to-hose reel hose
b.
Put in position, but do not wrap
assemblies (2)
around reel at this time.
and (3)
39. Fitting (4)
Adapter (5) and
a.
Takeoff tag.
needle valve-to-
b.
Screw on, and tighten using 7/8-inch
hose reel hose
and 314-inch wrenches.
assembly (3)
40. Fitting (6)
Adapter (7) and
a.
Take off tag.
needle valve-to-
b.
Screw on, and tighten using 1-inch
hose reel hose
and 7/8-inch wrenches.
assembly (3)
41. 90 swivel
Quick disconnect to-
a.
Check tag for proper location.
adapter (8)
hose reel hose
b.
Screw on, and tighten using
assembly (9)7/8-inch
and 11/16-inch wrenches.
42. 90swivel
Quick disconnect to-
a.
Check tag for proper location.
adapter (10)
hose reel hose
b.
Screw on, and tighten using
assembly (11)
7/8-inch and 1-inch wrenches.
43. Reel assembly (1)
Two needle valve-
Wrap around reel.
to-hose reel hose
assemblies (2)
and (3)
44. Reel mounting
Reel assembly (1)
Put on.
bracket (12)
45. Reel mounting
Two screws (13)
Screw in, and tighten using 3/4-inch
bracket (12) and
and new elastic
socket, extension, handle with 1/2-inch
reel assembly (1)
stop nuts (14)
drive, and 3/4-inch wrench.
2-960
Previous Page
