TM 9- 2320-269-20-2
AUGER LOCK HYDRAULIC DRIVE LINES
This task covers:
a. Removal (page 2-942)
c.
Inspection/Replacement (page 2-944)
b. Disassembly (page 2-943)
d.
Installation (page 2-945)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Pail, utility, 3-qt
Solvent, drycleaning (item 28, appendix C)
Tape, fish, 50-ft reel
Tags, marking (item 29, appendix C)
Wrench, open-end, 9/16-inch
Tape, teflon (item 32, appendix C)
Wrench, open-end, 11/16-inch
Personnel Required
Materials/Parts
Two
Detergent, non-sudsing (item 12,
appendix C)
Equipment Condition
Console cover removed (page 2-1092).
Rags, wiping (item 24, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. 900 swivel
Valve-to-auger
a. Position pail to catch hydraulic fluid.
adapter (1)
lock cylinder
b. Using 9/16-inch and 11/16-inch
hose assembly (2)
wrenches, unscrew and take off.
c. Tag hose(2).
d. Dispose of drained fluid.
2. Derrick leg (3)
Valve-to-anger
Pull through toward back of truck.
and guide rings (4)
lock cylinder
hose assembly
2-942
Previous Page
