TM 9-2320-269-20-2
STORAGE DOOR LATCHES AND LOCKS
This task covers:
INITIAL SETUP:
Tools
Materials/Parts
Bit, drill, 3/16-inch
Lockwasher, lock tab to lock
Drill, portable, electric
Lockwasher, lock to door
Hammer, ball-peen,
Rivet, blind (five required)
machinist's
Punch, drive-pin, straight,
Personnel Required
3/16-inch
Riveter, hand, blind
One
Screwdriver, cross-tip, number two
Wrench, box-end, 7/8-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
The steps in this task are the same for all latches and locks on storage compartment doors except pull
latches on the front compartment doors. One latch from left-front compartment door is used as the
example.
1.
Lock tab (1)
Screw (3) and
a. Open door (5), and using cross-tip
to lock (2)
lockwasher (4)
screwdriver, unscrew and take out.
b.
Get rid of lockwasher (4).
2. Lock (2)
Lock tab (1)
Take off.
3.
Lock (2) to
Nut (6) and
a. Using 7/8-inch wrench, unscrew and
door (5)
lockwasher (7)
take off.
b.
Get rid of lockwasher (7).
2-862