TM 9-2320-269-20-2
SPLASH APRON - CONTINUED
INITIAL SETUP
Tools
Materials/Parts
Handle, ratchet,
Apron, splash
3/8-inch drive,
Socket, 3/8-inch drive,
Personnel Required
-inch
Wrench, box-end, -inch
One
ACTION
LOCATION
ITEM
REMARKS
REPLACEMENT
NOTE
The steps in this task are the same for both left and right splash aprons. the left apron is used as the
example.
1.
Splash apron (1)
Four screws (3),
Using -inch wrench, -inch socket,
to body (2)
washers (4), nuts
and handle, unscrew and take off.
(5), and splash
apron (1)
2.
Body (2)
New splash
Put in place, and hold. apron (1)
3.
Splash apron (1)
Four screws (3),
Screw in, and tighten using -inch
to body (2)
washers (4), and
wrench, -inch socket, and handle.
TASK ENDS HERE
TA229131
2-865
Previous Page
