TM 9-2320-269-20-1
WINCH SUPPORT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
24.
Winch support (1)
Two screws (3) and
Screw in, but do not tighten using 15116-
to right support
new self-locking
inch box-end wrench, 15/16-inch socket,
bracket (2)
nuts (4)
and handle with 1/2-inch drive.
25.
Winch support (1)
Two screws (7),
Screw on, but do not tighten using
and two spacers
nuts (8), and new
1516-inch box-end wrench, 1 1/16-inch
(5) to left front
lockwashers (9)
socket, and handle with 1/2-inch drive.
spring bracket (6)
26.
Winch support (1)
Two screws (11) and
Screw in, but do not tighten using 15/16-
to left support
new self-locking
inch box-end wrench, 15/16inch socket,
bracket (10)
nuts (12)
and handle with 1/2-inch drive.
27.
Winch support (1)
Four screws (7)
Tighten using 1516-inch box-end wrench,
to two spring
and nuts (8)
1 1/16-inch socket, and handle with
brackets (6)
1/2-inch drive.
28.
Winch support (1)
Four screws (3) and
Tighten using 15/16-inch box-end wrench,
to two support
(11) and nuts
15/16-inch socket, and handle with
brackets
(4) and (12)
1/2-inch drive.
(2) and (10)
Winch support (1)
Remove hoist.
TA228997
2-678
Previous Page
