TM 9-2320-269-20-1
WINCH SUPPORT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
20.
Left front spring
Two screws (16) and
Put in place.
bracket (15)
two spacers (17)
21.
Right front spring
Two screws (19),
Put in place.
bracket (18)
Inner spacer (20),
Outer spacer (21) has notch
and outer spacer (21)
cut out of top.
22.
Front spring
Winch support (2)
a. Using hoist, put in place working
brackets
screws (16) and (19) through holes,
(15) and (18)
with help from assistant.
b. Support, using trestles.
23.
Winch support (2)
Two screws (19),
Screw in, but do not tighten using
and spacers
nuts (22), and new
15/16-inch box-end wrench, 1 1/16-lnch
(20) and (21) to
lockwashers (23)
socket, and handle with 112-inch drive.
right front spring
TA228996
2-677
Previous Page
