TM 9-2320-269-20-1
WINCH SUPPORT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
11.
Brace (1) to
Two screws (3),
a. Using 9/16-inch box-end wrench,
winch support (2)
nuts (4), lock-
9/16-inch socket, and handle with
washers (5), and
3/8-inch drive, unscrew and take off.
winch support (2)
b. Get rid of lockwashers (5).
12. Right support
Screw (8), nut (9),
a. Using 15116-inch box-end wrench,
bracket (6)
lockwasher (10),
15/16-inch socket, and handle with
to frame (7)
and support
1/2-inch drive, unscrew and take off.
bracket (6)
b. Get rid of lockwasher (10).
13.
Left support
Screw with stop
a. Using 1 1/16-inch socket and handle
bracket (11)
plate (12), nut
with 1/2-inch drive, unscrew and take
to frame (7)
(13), lockwasher
off.
(14), and support
b. Get rid of lockwasher (14).
bracket (11)
INSTALLATION
14.
Frame (7)
Left support
Put in place, and hold.
bracket (11)
15.
Left support
Screw with stop
Screw on, and tighten using 1 1/16-inch
bracket (11)
plate (12), new
socket and handle with 1/2-inch drive.
to frame (7)
lockwasher (14),
and nut (13)
16.
Frame (7)
Right support
Put in place, and hold.
bracket (6)
17.
Right support
Screw (8), nut (9),
Screw in, and tighten using 15/16-inch
bracket (6)
and new lock-
box-end wrench, 15/16-inch socket, and
to frame (7)
washer (10)
handle with 1/2-inch drive.
18.
Winch support (2)
Brace (1)
Put in place, and hold.
19.
Brace (1) to
Two screws (3), new
Screw on, and tighten using 9/16-inch
winch support (2)
lockwashers (5),
box-end wrench, 9/16-inch socket, and
and nuts (4)
handle with 3/8-inch drive.
2-676
Previous Page
