TM 9-2320-269-20-1
DOUBLE CHECK VALVES - CONTINUED
STANDARD DOUBLE CHECK VALVE INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE
1. Close reservoir draincocks (page 2-106).
2. Check valves for proper operation (page 2-106) or (TM9-2320-269-10).
TASK ENDS HERE
AIR CONTROL VALVE
This task covers:
a. Removal (page 2-526)
b. Installation (page 2-528)
INITIAL SETUP
Tools
Personnel Required
Screwdriver, cross-tip, number two
One
Wrench, open-end, 7/16-inch
Wrench, open-end, 9/16-inch
Equipment Condition
Wrench, open-end, 5/8-inch
Air reservoirs drained (page 2-106).
Materials/Parts
Lockwashers, dash panel (two required)
Tags, marking (item 29, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Drain air from system before removing lines or fittings to avoid personnel injury from
2-526
Previous Page
