TM 9-2320-269-20-1
TRANSMISSION OIL LEVEL GAGE AND TUBE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
9.
Oil pan (1)
New seal (2) and
a. Take out dust cap.
tube assembly (3)
b. Screw in, and tighten using
1 1/16-inch wrench.
10.
Bracket (4)
Clamp (5) and
a. Slide clamp (5) into place.
screw (6)
b. Put screw (6) through.
11.
Screw (6)
Nut (7)
Screw on, and tighten using 1/2-inch
socket, handle, and 112-inch wrench.
12.
Tube assembly (3)
Gage (8)
Put in.
NOTE
FOLLOW-ON MAINTENANCE:
1. Service transmission (LO 9-2320-269-12).
2. Check tube and seal for leaks.
TASK ENDS HERE
TA228848
2-438