TM 9-2320-269-20-1
Section XII. TRANSMISSION
Page
Page
Transmission Control Cable .........................
Transmission Oil Level Gage and
Transmission Oil Cooler Hoses ....................
Tube ..........................................
Transmission Oil Cooler Lines .....................
Transmission Oil Pan .........................
Transmission Oil Filter and
Screen....................................................
TRANSMISSION OIL LEVEL GAGE AND TUBE
This task covers:
a. Removal (page 2-436)
b. Installation (page 2-437)
INITIAL SETUP:
Tools
Personnel Required
Cap, dust
One
Handle, ratchet, 3/8-inch drive
Pan, drain Equipment Condition
Socket, 3/8-inch drive, 1/2-inch
Wrench, open-end, 1/2-inch
Transmission drained (LO 9-2320-269-12).
Wrench, open-end, 9/16-inch
Engine right side hood panel raised
Wrench, open-end, 1 1/16-inch
Materials/Parts
Seal, gage tube
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Tube assembly (1)
Gage (2)
Pull out, and set aside.
2. Clamp (3)
Nut (4) and
Using 1/2-inch socket, handle,
screw (5)
and 1/2-inch wrench, unscrew and take
off.
3. Oil pan (6)
Tube assembly (1)
a. Place drain pan underneath to catch
and seal (7) draining fluid.
b. Using 1 1/16-inch wrench, unscrew
and take off.
c. Put in dust cap.
b. Get rid of seal (7).
2-436
Previous Page
