TM 9-2320-269-20-1
BATTERY CABLES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CONNECT - CONTINUED
NOTE
To insure proper connections, clean off corrosion with wire brush from terminals.
If only negative battery cable was disconnected, go to step 29.
27. Two positive battery
Two cable clamps (2)
Using terminal spreader, open and
terminals (1)
put on.
28. Two positive cable
Two nuts (4)
Tighten using 1/2-inch wrench.
clamp screws (3)
29. Two negative battery
Two cable clamps (6)
Using terminal spreader, open and
terminals (5)
put on.
30. Two negative cable
Two nuts (8)
Tighten using 1/2-inch wrench.
clamp screws (7)
31.Battery box (9)
Cover (10)
Put on.
32.Battery box
Two latches (11)
Hook into retaining tabs (12), and tighten
cover (10)
pushing downward.
2-420
Previous Page
