TM 9-2320-269-20-1
BATTERY CABLES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
17. Two positive cable
Positive battery
Screw in, and tighten using 9/16-inch
clamps (1)
cables (2), two
wrench.
screws, (3), and
nuts (4)
18. Negative cable
Negative battery
Screw in, and tighten using 9/16-inch
clamp (5)
cable (6), screw
wrench.
(7), and nut (8)
INSTALLATION
NOTE
Clean off corrosion with wire brush to insure proper connections.
Check wire markings to insure proper hookup.
19. Starting motor
Positive battery
Slide underneath grill (10), and
solenoid (9)
cable (2)
put on.
20.
24-volt converter
Put on.
cable (11)
21
Terminal nut (12)
Screw on, and tighten using 3/4-inch
deep well socket, handle, and 3/4-inch
wrench.
22. Battery box (13)
Ground strap (14)
Hold in place.
23. Battery ground
Screw (15), new
Screw in, and tighten using 9/16-inch
strap (14)
lockwasher (16),
socket, handle, and 9/16-inch wrench.
and nut (17)
24. Battery box (13)
Two batteries (18)
Install (page 2-421).
2-418
Previous Page
