TM 9-2320-269-20-1
HEADLIGHTS
This task covers:
a. Removal (page 2-367)
b. Installation (page 2-367)
INITIAL SETUP
Tools
Equipment Required
Pliers, long round-nose
Battery ground cable disconnected
Screwdriver, cross-tip, number two
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Headlight rim (1)
Screw (3)
Take out using cross-tip screwdriver.
to headlight
housing (2)
2.
Front fender (4)
Headlight rim (1)
Unhook from fender tab (5), and
remove.
3.
Retaining
Adjusting
Using pliers, unhook.
ring (6)
spring (7)
NOTE
To save time and trouble when installing headlight, do not loosen headlight adjusting screws.
4.
Headlight
Headlight
Slide adjusting housing tabs (9) from
housing (2)
assembly (8) adjusting screws (10), and pull
assembly forward.
5.
Headlight
Harness
Unplug, and take out.
assembly (8)
connector (11)
6.
Headlight
Retaining ring
Unhook ring (6) from housing tab
(13),
assembly (8)
(6) and adjusting
and set aside.
housing (12)
7.
Headlight (14)
Take off.
2-366
Previous Page
